+86-0510-86595506
marque: Yangtian
Industrie Applicable: Usine de fabrication, Usine d'aliments et de boissons, Travaux de construction, Énergie et mines
Où Fournir Des Services Locaux (dans Quels Pays Existe-t-il Des Points De Service à L'étranger): Royaume-Uni, États Unis, Italie, Allemagne, Viet Nam, Philippines, Thaïlande, Japon
Vieux Et Nouveau: Nouveau
Lieu D'origine: Chine
Utilisation: Azote
Période De Garantie: 1 année
Argument De Vente Principal: Grande productivité
Type De Marketing: Nouveau produit 2020
Rapport D'essai Mécanique: Fourni
Inspection D'usine Vidéo: Fourni
Période De Garantie Des Composants De Base: 1 année
Composants Principaux: PLC, Moteur
Specification: 3Nm3/h--3000Nm3/h
OEM: Available
Color: Blue/White or Customized
Technology: Psa(Pressure Swing Adsorption)
Application Field: Food, Chemical
Useage: Nitrogen
Nitrogen Gas Purity: 99.5%--99.9995%
Service Life: 8-10 Years with Proper Maintenance
Certification: ISO, CE, TUV
Détails d'emballage: Cas en bois exporté
transport: Ocean,Land,Air,Express
Lieu d'origine: Jinagsu, Chine
Soutenir: 5000 Set/Set per Year
Hafen: shanghai
Type de paiement: L/C,T/T
Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP,DDP
High Outlet Pressure Nitrogen Generator for Laser Cutting
The usage of nitrogen as in carbon steel and stainless steel:
1. Carbon steel Carbon steel is cut with oxygen gas. Surface temperatures are very high due to carbon-assisted melting and oxygen-assisted combustion. When cutting sharp-edged holes with a diameter smaller than the thickness of the material, the narrow too much heat is concentrated in the area, making the cutting quality unguaranteed. Nitrogen gas does not assist combustion and has a cooling effect, which is suitable for solving such processing problems. Also c an improve product quality.
2. Considering the cost of stainless steel, the oxidation of the cutting edge does not affect the use of oxygen cutting for stainless steel parts. However, the content of alloy elements such as in stainless steel is relatively large, and the melting has h igh viscosity, poor fluidity, and low air pressure during oxygen cutting can easily lead to quality defects such as sticky slag. When welding stainless steel, the oxide layer seriously affects the welding quality, especially it is argon arc welding. The high-quality non-oxidative section provided by nitrogen cutting meets the high requirements of stainless steel welding for cutting sections.
The working principle of PSA nitrogen generator：
The raw material air is compressed by the air compressor and enters the post-stage air storage tank. Most of the oil, liquid water and dust adhere to the container wall and flow to the bottom of the tank and are regularly discharged from the blowdown valve. Part of it enters the compressed air purification system with the air flow.
The air purification system consists of a refrigerating machine, three filters with different precisions and a degreaser. The liquid water, oil, and dust in the compressed air are filtered clean by freezing and dehumidification and the filter from coarse to fine.
The dew point of the compressed air pressure is reduced to 2~10℃, the oil content is reduced to 0.001PPm, and the dust is filtered to 0.01μm, which ensures the cleanliness of the raw gas entering the PSA nitrogen generator.
The purified air enters the two adsorption towers of the nitrogen making machine through two paths, and is alternately adsorbed and desorbed through the automatic switching of the pneumatic valve on the nitrogen gas generator. This process separates most of the nitrogen and a small part of oxygen gas in the air.and evacuated the oxygen-enriched air. Nitrogen enriched at the top of the tower is transported to the back-stage nitrogen storage tank by pipeline, and enters the gas point after passing through the flow meter.
Jiangyin YangTian Gas Equipment Co., Ltd. Is located in the Industry zone of Jiangyin city, company is professionally engaged in development and manufacturer of gas equipment. And it is well-known as advanced technology, high quality and efficient service. Jiangyin YangTian Gas Equipment Co., Ltd. Is specialized in design, manufacture, sale and service of Air Separation Device, PSA Nitrogen Generator, Nitrogen Gas Purification Equipment, PSA Oxygen Generator, Ammonia Decomposition Hydrogen Device, Hydrogen Purification Device, PSA Hydrogen Generator, Nitrogen-Hydrogen Ratio Device, Air Compressor System, Cryogenic Vacuum Storage Tank, Liquid Storage Tank etc. products are widely used in Petrochemical, Chemical, Hear treat, Metallurgy, Glass, Food, Medicine, Electronics and Defence & Aerospace Industrial. Adhering to the philosophy of [Human Oriented, Pragmatic and Innovative, Client Oriented and Quality First", the company has been actively exploring and development new process and technologies and actively introducing advanced technologies and technological innovations from home and abroad. We look forward to work avec vous! 
Groupes de Produits : Azote > Générateur d'azote 99.999%
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now